Open topic with table of contents
A manufactured home is a single-family house constructed entirely in a controlled factory environment and built to the federal Manufactured Home Construction and Safety Standards (better known as the HUD Code). In Canada they are built to the Canadian Standards Association's Mobile Home Series of Standards (CSA Certified). Multi-wide homes are residential structures that consist of two or more single units that are joined together at the site to make one living unit. The assembled homes are typically 24, 28 or 32' wide and can be as long as 80' however 42' and 50' are typical. Once delivered, the homes need to be bolted together, set on piers or a basement and have the water, sewer, and electrical connected. If more than one story, a crane is used to stack one unit on top of the other. Additional services are often done when the home is first set such as installing skirting, connecting the air conditioner, and removing the hitch and wheel assemblies.
They are built on steel undercarriages with necessary wheel assemblies for transporting to permanent or semi-permanent sites. The wheel assembly and hitch can be removed once the home has been set. The steel undercarriage, however, will remain intact since it is incorporated into the framing of the home. A red permanently attached HUD label (CSA label in Canada) must be attached to each transportable section of the home. The label is found on what would be considered the rear exterior of the home when in transit.
Example HUD label:
Example CSA label:
Note: Setup, delivery, and installation fees are not included in the costs. They must be added using the appropriate Setup Fees material selection under Exterior Features.
To define a crawlspace with a mobile manufactured home, select the Post and Pier Foundation. If the crawlspace is enclosed, also add the appropriate skirting/foundation material.
Help file last modified: 7/26/2018